wundr

Build a Switch

a switch with nothing that moves, printed in layers.

a story in five chapters: zoom from a phone to one of its chip's 19 billion switches, guess what flips it, then build the Hacker Fab's self-aligned NMOS layer by layer: set the dose that prints a 5 um gate, watch acid undercut it and plasma keep it, flip to a negative resist and the gate becomes a hole, rain phosphorus that the gate shadows, and raise the gate past 1.26 V until electrons flow and the lamp lights

A transistor is a switch with no moving part, and every layer above the silicon is shaped by a printed pattern. One phone chip holds about 19 billion of them (Apple's A17 Pro, 2023). The zoom from the phone to one transistor is drawn, not to scale: a phone's transistors are a few tens of nanometres across, and the one opened here is the Hacker Fab's, an open student fab (docs.hackerfab.org, "Self Aligned NMOS"): lightly p-doped silicon under 20 nm of oxide and 500 nm of polysilicon, a gate 5 um long (source to drain) printed in AZ P4210 resist, and a measured threshold of 1.26 V. The gate: a positive resist clears where enough light lands, and the stepper blurs the chrome's edge, so too little dose leaves scum in the open and too much eats into the line and prints the gate thin. Here that is the mask blurred by a Gaussian of sigma 0.6 um (a toy blur, not a measured one) against a resist that clears with the cube of the dose over its clearing dose; the gate prints 5.0 um at 1.59 clearing doses. The etch: wet acid eats every way at once, so it undercuts the resist (here an isotropic front of 0.65 um, a 30% over-etch of the 500 nm poly) and the gate comes out about 4.2 um at its foot; a plasma's ions fall straight down and leave vertical walls; the Hacker Fab etches its gates in an SF6 plasma. The resist: a negative resist stays where light lands, so the same mask prints the opposite pattern, and the gate becomes a hole (a what-if: the Hacker Fab prints all four patterns in the positive AZ P4210). The dope: phosphorus is put into the silicon beside the gate, and the gate blocks it over its own channel, so the source and drain line up with the gate by themselves (self-aligned). Fabs implant the ions as drawn; the Hacker Fab coats the wafer in a phosphorus spin-on dopant (Filmtronics P504), patterns it with a second mask and drives it in, in a furnace at 1100 C, instead; the gate still shields its own channel. The switch: spin-on glass, contact holes and aluminium wire it up. A positive voltage on the gate pushes away the silicon's positive carriers (holes) and, past the threshold, pulls a thin channel of electrons under it that joins source to drain, so current flows; in a long transistor like this one it grows about as the square of the voltage past the threshold (once the drain voltage is high enough). Here the lamp and the flow are a cartoon of that, with no current units. Layers are drawn thick enough to see, not to scale. The photons (410 nm, violet), ions, droplets, molecules and electrons are drawn as characters, one for very many.

Concepts: electricity, chemistry, optics.

An idea you find out by playing, on Wundr, made by @neelu.

On the shelf matter, and also on senses.

More on matter